Futaba S9252 數位伺服機 digital servo
用途：直昇機.飛機用.防塵防水
尺 寸 : 40 X 20 X 36.6mm
重 量 : 50公克
動作速度 : 0.14秒 / 60度 (4.8V時)
出 力 : 6.6公斤 (4.8V時)
鎳鎘電池.4.8V專用
| Futaba S9252 Digital High Torque, All-Purpose F3C Servo with High-Current Wire Lead and "J" Connector FEATURES: Digitally enhanced microprocessors cut about 1/2 the response time from transmitter input to servo reaction. Coreless motor, Dual ball bearings on the output shaft, Plastic/nylon gear train High current, high capacity wire lead with low resistance. Works well with all control surfaces on F3C helicopters or precision fixed wing aircraft. SPECS: Speed: .14 sec/60 degrees (4.8V) Torque: 92 oz/in (6.6 kg-cm) ( on 4.8V) Weight: 1.8 oz (50 g) Power Supply: 4.8V (Futaba does not recommend using 6V) Length: 1.6" (41mm) Width: .8" (20mm) _ Height: 1.5" (38mm) -Current Drain: Futaba S9252 Servo is specially designed for high- torque and high-speed, therefore very high current drain is normal at startup. (1) Always use a 4.8V NiCd battery. Dry cells are rated at 1.5V each making the overall voltage 6.0V which will damage the gyro. (2) When using systems with the battery fail safe function it has a higher cut-off voltage setting which will cause shorter operation time. (3) When installing the servo please check pushrod linkage to make sure there is no binding in order to prevent excessive power consumption and decrease the life of the motor and battery. |
