＜PA-2を装備すると＞
●フライト中、上空で飛行姿勢が乱れたときには、送信機のスティックから指を離せば、機体は自動的に水平飛行に戻ります。
●ビギナーにとって一番難しい着陸は、水平飛行を保持しながら降下してくるので、着陸操作がきわめて容易にできます。高翼機など機体によってはエンジンコントロールのみで着陸できます。
●上空飛行でトリム修正のできない方、また旋回飛行の操作が思い通りにできない方のフライトをアシスト。特に横風等の影響をほとんど受けません。
●本体に感度ボリュームを装備。飛行中は送信機でも調整できます。
●センサー本体は取付後の角度調整も可能な可動式。
PA-2 Pilot Assist Link Auto Pilot System
Stacks the odds against a crash!
A sudden wind gust or a momentary loss of orientation sends your model reeling. Time to panic? Not if your plane is equipped with Futaba's PA-2 Pilot Assist Link. Just release your transmitter sticks to regain straight and level flight.
Lighter, lower priced and less complicated than gyros, the revolutionary PA-2 acts as a horizontal stabilizer - if your plane strays from level, it "rights" the model automatically. You may never crash again!
How can the PA2 help me maximize the value of PCM and fail-safe?
Have a 4 channel radio? You can still adjust the unit on the ground!
Installs in minutes
- Requires almost no modifications - just one discreet 10 mm hole in the fuselage bottom for sensor mounting.
- Draws only 5 mAh from your 4.8V receiver NiCd...no additional battery needed!
Works automatically
- Releasing the transmitter sticks allows the PA-2 to take control.
- Optical sensors read the difference between light (sky) and dark (horizon), then automatically adjust pitch and roll to stabilize the plane.
- Moving the transmitter sticks puts you back in the "pilot's seat."
- Adjusts to be as sensitive as you like.
- Setting can be changed during flight using a 5-channel radio - anywhere from 0% (take no action) to 100% (for maximum stability).
- "Maximum" is perfect for trainer pilots - does not replace a flying instructor, but DOES boost your confidence at the controls.
- With a 4-channel radio, the PA-2 sensitivity can be adjusted on the unit.
SPECIFICATIONS
Stock Number: FUTM0999
Power Requirement: 4.8 Volt (NiCd Battery)
Current Drain: 5 mAh (at 4.8V)
Amplifier Length: 2.1 in (54 mm) (excluding protruding parts)
Width: 1.3 in (34 mm)
Height: 0.6 in (15 mm)
Weight: 0.9 oz (25 g)
Sensor Diameter: 1.3 in (33 mm)
Weight: 0.5 oz (15 g) (excluding screws)
